Madumetja Masalesa Adm HES21021
Q1. Where are you located?
A1)South Africa, in
Soshanguve Township north of Pretoria.
Q2. Are you a beginner in electronics
or advanced user doing some refresher?
A2)I am intermediate.
Q3. How would you rate our course in
the range of 1(low) – 10(high)?
A3) 10
Q4. Would you mind to share your
educational background?
A4)I passed Matric in
1980 and trained as a Mathematics
Teacher. Later I studied Electronics on
my own and got a
Diploma
in Electronics in 2005.
Q5. Do you do electronics as a full
time job or hobby?
A5) Hobby as I am a
Campus Manager in a TVET College.
Q6. What advice would you give to
upcoming technician?
A6) Never give up. You
need to practice to be perfect. Read electronics books and join repair groups
to get ideas from your peers.
Q7. Any improvement you would suggest
on the course.
A7) None. Advanced Course
is needed.
Q7. Approximately, how long did it take
you to complete the course?
A7)Two weeks
Q8. Do you prefer certificate in soft
or hard copy?
A8) Soft copy
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
MEVIAS KINDELE Adm HES21020
Q1. Where are you located?
A1) Lusaka, Zambia
Q2. Are you a beginner in electronics or advanced user doing some refresher?
A2)A beginner
Q3. How would you rate our course in the range of 1(low) – 10(high)?
A3) 9
Q4. Would you mind to share your educational background?
A4) Yes,I completed my
senior secondary and obtained a grade 12 certificate. College-I have a craft
certificate in power electrical also a G7 certificate in the some field.
Q5. Do you do electronics as a full
time job or hobby?
A5) Hobby
Q6. What advice would you give to upcoming technician?
A6)To continue acquiring
more knowledge on electronics as technology is changing, lastly “to learn to
do” to be practical.
Q7. Any improvement you would suggest on the course.
A7) Add notes on troubleshooting
technics on radios,amplifiers,lcdand ledtv also to come up advanced certificate
or diploma.
Q7. Approximately, how long did it take you to complete the course?
A7) 3 weeks
Q8. Do you prefer certificate in soft or hard copy?
A8) Hard Copy
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
EVANSON WAWERU Adm HES21015
Q1. Where are you located?
A1)EMBU- KENYA
Q2. Are you a beginner in electronics or advanced user doing some
refresher?
A2)A beginner
Q3. How would you rate our course in the range of 1(low) –
10(high)?
A3)10
Q4. Would you mind to share your educational background?
A4)am a form
three leaver
Q5. Do you do electronics as a full time job or hobby?
A5)I do electronics as a full time job
Q6. What advice would you give to upcoming technician?
A6) knowing you need to know is the thing
Q7. Approximately how long did it take you to complete the course?
A7) A round four weeks
Q8. Do you prefer certificate in soft or hard copy?
A8) hard copy/both
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
MABAKANE SEIMELA Adm HES21014
Q1. Where are you located?
A1) Johannesburg – South Africa
Q2. Are you a beginner in electronics or advanced user doing some refresher?
A2) I would say
intermediate doing refresher as I stopped working on electronics ten years ago
Q3. How would you rate our course in the range of 1(low) – 10(high)?
A3) 8
Q4. Would you mind to share your
educational background?
A4) I studied B.Tech Technical Education at a university of Technology specializing in Electrical Technology and Mathematics, of course my other qualifications are B.Tech Human Resource Development and B.COM (HNRS) business management
Q5. Do you do electronics as a full time job or hobby?
A5)Currently is a hope
that I want to convert to fulltime job e.g. open own tv repair workshop
Q6. What advice would you give to upcoming technician?
A6) Enjoy what you do and
used that leverage to generate income
Q7. Any improvement you would suggest on the course?
A7) I would suggest that
you take this course a step further by introducing the next level (intermediate
and advance)
Q7. Approximately, how long did it take you to complete the course?
A7) Three and a half
weeks
Q8. Do you prefer certificate in soft or hard copy?
A8) Soft copy will do
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
ANSAR HUSSAIN Adm HES21013
Q1. Where are you located?
A1) United Kingdom East London
Q2. Are you a beginner in electronics
or advanced user doing some refresher?
A2) I am a beginner
Q3. How would you rate our course in
the range of 1(low) – 10(high)?
A3)its good very
interesting so 9
Q4. Would you mind to share your
educational background?
A4) secondary school to
CSE standard, I have got City and Guilds certificates D32/33 Assessor and C25
Coaching (Instructor Train Driver)
Also qualified ECB level
1 and 2 cricket coach.
Q5. Do you do electronics as a full
time job or hobby?
A5)
Q6. What advice would you give to
upcoming technician?
A6)
Q7. Any improvement you would suggest
on the course?
A7)
Feedback
When marking the
assignments No explanation is given if the answer not correct, it would help
with a little note of the correct answer instead being marked at 90%.
That would help as it
feels like being left in the dark!
I enjoyed the course all
the same and would be interested in future courses especially how S.M.P.S ‘s
work like a flow arrows of AC going in and to DC and the power supply coming on
if all is well.
Great little course for a
beginner
Regards
Ansar
Q7. Approximately how long did it take
you to complete the course?
A7)
Q8. Do you prefer certificate in soft
or hard copy?
A8)
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
GIVEMORE CHIPOYA Adm HES21012
Q1. Where are you located?
A1) Zimbabwe
Q2. Are you a beginner in electronics or
advanced user doing some refresher?
A2) beginner.
Q3. How would you rate our course in the
range of 1(low) – 10(high)?
A3) 10
Q4. Would you mind to share your
educational background?
A4) My highest academic qualification is ordinary level certificate of education and my highest
professional qualification is a diploma in science education. I never done any
electronics course before and this my first one.
Q5. Do you do electronics as a full time job or hobby?
A5) currently lam doing it
as a hobby since I had limited electronics repair skills. However, with the
knowledge and skills I have acquired from this course I will soon be doing it
full time.
Q6. What advice would you give to upcoming technician?
A6) Have a mentor to guide
you and should keep on learning and practicing. Practice makes perfect.
Q7. Any improvement you would suggest on
the course?
A7) The course is perfect for both beginners and
advanced technicians. What I would suggest on this course is to increase the
number of assignments at least one per lesson.
I would like also to
suggest that the graduation certificate should have the name of the school or
institution on top.
Q7. Approximately how long did it take you to complete the course?
A7) 1 week.
Q8. Do you prefer certificate in soft or hard copy?
A8)For now soft copy is
fine. I might request for a hard copy later.
Classes ongoing here!
The end
All the best from the desk of Humphrey
Kimathi
Kashief Mohamed Adm HES21005
Q1. Where are you located?
A1) Cape Town, South Africa
Q2. Are you a beginner in electronics or
advanced user doing some refresher?
A2) I would say I am at an
intermediate level currently
Q3. How would you rate our course in the
range of 1(low) – 10(high)?
A3) 10
Q4. Would you mind to share your
educational background?
A4) I have a BSc
qualification and working in the pharmaceutical industry currently
Q5. Do you do electronics as a full time
job or hobby?
A5) Hobby at the moment –
wish I had more time to spend on it though!
Q6. What advice would you give to
upcoming technician?
A6) Courses like this one I
just completed really helps….Youtube carries a wealth of information also.
Never stop learning!
Q7. Any improvement you would suggest on
the course?
A7) Perhaps videos on
showing practical steps/examples on how to do troubleshooting/fault-finding
Q7. Approximately how long did it take
you to complete the course?
A7) Due to being full time
employed I unfortunately only have time weekends for the assignments so took me
4weeks
Q8. Do you prefer certificate in soft or
hard copy?
A8) Soft copy would be fine
thanks.
Classes ongoing here!
The end
All the best from the desk of Humphrey
Kimathi
James Lane adm. no. HES21001
Q1. Where are you located?
Alabama in the USA
Q2. Are you a beginner in electronics or
advanced user doing some refresher?
Advanced
Q3. How would you rate our course in the range of 1(low) – 10(high)?
10
Q4. Would you mind to share your educational background?
Graduated high school in 1976.
Went to united electronics
institute from 1977 to 1978.
Took several NRI courses. While
working for Long's Electronics
I went to Panasonic school for a week on vhs vcr's I then went to sony the next week to learn beta
max vcr's. I then worked on tv's and vcr's all day.
Q5. Do
you do electronics as a full time job or hobby?
Both, I am 63. I started
working in 1978 at 20 when I graduated from electronics school. I worked for
that company 33 years till they closed in 2011. I now work at home on anything
electronic.
Q6. What advice would you give to upcoming technician?
Pick a field of electronics
you like. Find a mentor who
really knows his stuff and
study hard. You will succeed.
Q7. Any improvement you would suggest on the course?
no
Q7. Approximately how long did it take you to complete the course?
1 month
Q8. Do you prefer certificate in soft or
hard copy?
soft
The end
Classes ongoing here!
All the best from the desk of Humphrey
Kimathi
Addiney
Hamunteka
Adm. no. HES21002
Q1. Where are you located?
A1) Lusaka, Zambia
Q2. Are you a beginner in electronics or advanced user doing some
refresher?
A2) Advanced user
Q3. How would you rate our course in the range of 1(low) –
10(high)?
A3) 10
Q4. Would you mind to share your educational background?
A4) In 2006 – 2007 I did a correspondence study in
Tv and Vcr Repair at Penn Foster School in USA. I obtained a career diploma
after completing my studies.
I did my grade 8-9 in 2000-2001 at Nyumba Yanga
School in Lusaka.
Q5. Do you do electronics as a full time job or hobby?
A5) Part time job
Q6. What advice would you give to upcoming technician?
A6) Be committed! What might, at first glance seem
too technical will in time become fairy simple and relatively easy to
accomplish.
Q7. Any improvement you would suggest on the course?
A7) It's perfect for beginners.
Q7. Approximately how long did it take you to complete the course?
A7) 9 days
Q8. Do you prefer certificate in soft or hard copy?
A8) I prefer a soft copy.
Classes ongoing here!
The end
All the best from the desk of Humphrey Kimathi
Daniel Ritter adm. no. HES21004
Q1. Where are you
located?
A1) United
States
Q2. Are you a beginner
in electronics or advanced user doing some refresher?
A2)
Advanced looking for refresher. Got degree in 1974. Wanted a refresher. Was not
too familiar with S.M.P.S.
Q3. How would you rate
our course in the range of 1(low) – 10(high)?
A3) 10
Q4. Would you mind to
share your educational background?
A4)
Associates Degree Electronics Technology
Associates Degree Computer Hardware
& Networking
Certificate HVAC/R Built electronic
control panels for environmental chambers
Held First Class FCC Radiotelephone
license w/Broadcast Endorsement
Q5. Do you do
electronics as a full time job or hobby?
A5)
Formerly as a full time job. Currently doing it as a hobby and part time. Want
to get back into it working from home to stay busy. The worst thing to do is
rest the mind.
Q6. What advice would
you give to upcoming technician?
A6) Keep
refreshing the basics. Never stop learning. Keep up with the new technology.
Q7. Any improvement you
would suggest on the course?
A7) Good
the way it is.
Q8. Approximately how
long did it take you to complete the course?
A8) A
week. Answered the questions that I was
sure I knew. Surprised the amount of the
basics I forgot.
Q9. Do you prefer
certificate in soft or hard copy?
A9) Soft
is fine. Be glad to stay in touch.
Always enjoy hearing from fellow “techies”
Classes ongoing here!
The end
All the best from the
desk of Humphrey Kimathi
No comments:
Post a Comment